Crystalyte Rear Wheel Motor 1000W

From €399.00 *

Prices incl. VAT plus shipping costs

Rotational Speed at 36 V:

  • mocy-r-HT3525-02
    • extremely powerful Crystalyte Rear Wheel Direct Drive
    • Spacing: 135 mm
    • with disc brake mount
Your Beneftis
  • Free shipping in GER from 100 €
  • Free shipping in EU from 500 €
  • 45 day returns policy
  • Free return shipping
Crystalyte 1000W Motor Ebike-Solutions sells well-proven, latest generation... more

Crystalyte 1000W Motor

Ebike-Solutions sells well-proven, latest generation 1000 Watt Crystalyte Motors. HT Series (HT3525) is the version with the highest torque: Fast acceleration and a lot of power but a slower top speed than the HS Series. HS Series (HS3540, HS3555, HS4080) is the fast variety among Crystalyte motors: slower acceleration, but a high top speed.



Crystalyte Motor
HT3525 HS3540 HS3555 HS4080
Info
High-torque
version (t=torque)
fast version (s=speed) fast version (s=speed) fast version (s=speed)
installation into rear wheel rear wheel rear wheel rear wheel
Bike no rim, no spokes. no rim, no spokes.
no rim, no spokes.
no rim, no spokes.
for wheel sizes 20/24/26/28 inch 20/24/26/28 inch 20/24/26/28 inch 20/24/26/28 inch
Top speed
in 26" wheel, 48V
up to 50kph (31mph) up to 55kph (34mph) up to 60kph (37mph) up to 60kph (37mph)
climbing ability very good good good good
Maximum power 1500W 1500W 1500W 2500W
Rotational speed (rpm) at 36V 245rpm 375rpm 475rpm 420rpm
motor colour black black black black


Lacing the motor to a rim

We are glad to professionally build your wheels for you. Our mechanics only use high-quality parts of well-known suppliers and have a keen eye on sturdiness and longevity. As long as technically possible we use sturdy double wall aluminium rims that allow the spoke to enter the rim without bending. We exclusively use stainless steel spokes from brand manufacturers.

Your choice of either black or silver spokes and rims, respectively. Please note how many gears your freewheel needs to have. Without any specification we will usually true your wheel to fit a seven-speed cogset. go to wheel building service



Attaching brake disc

Front wheel and rear wheel motors use a 6-hole-pattern disc brake mount. With all Crystalite motors the distance between brake disc and motor housing is 18mm for 160mm, 180mm and 203mm discs. Until now we have never experienced that a brake disc could not be mounted on a Crystalyte motor.

Note: To tighten brake disc to the motor use 5x8mm bolts only. Longer bolts could block the motor's mechanism and damage your conversion kit. Find suitable bolts here: 5x8mm stainless steel TORX bolts.



Technical details HT3525 HS3540 HS3555 HS4080
motor weight 7.3kg (16.1lbs) 7.3kg (16.1lbs) 7.3kg (16.1lbs) 8kg (17.6lbs)
Motors number of spoke holes 36 36 36 36
Spacing 135mm with 6/7-speed freewheel, 139mm with 8/9-speed, up to 142mm with 10-speed 135mm with 6/7-speed freewheel, 139mm with 8/9-speed, up to 142mm with 10-speed 135mm with 6/7-speed freewheel, 139mm with 8/9-speed, up to 142mm with 10-speed 135mm with 1/3-speed freewheel, 137mm with 5-speed,
up to 140mm with 7-speed
Rated continuous power 1000W 1000W 1000W 1000W
Voltage 36V / 48V 36V / 48V 36V / 48V 36V / 48V
Type Direct drive without freewheel Direct drive without freewheel Direct drive without freewheel Direct drive without freewheel
Brake disc mount yes / possible with 160mm discs and up yes / possible with 160mm discs and up yes / possible with 160mm discs and up yes / possible with 160mm discs and up
Hall sensors yes yes yes yes
Recuperation possible?
yes, depends on control system yes, depends on control system yes, depends on control system yes, depends on control system

Please note: E-bikes need to have an operating license and insurance, if they shall be used in public road traffic. Please check with your local licensing authority (in Germany: TÜV or similar organisation) about licensing requirements.


Do you have any further questions?

FAQs and answers about our online shop, please click:

FAQs
Technische Details HT3525 HS3540 HS3555 -->... more
Technische Details HT3525 HS3540 HS4065 HS4080
Motorgewicht 7,3 kg 7,3 kg 8kg 8kg
Speichenlöcher des Motors 36 36 36 36
Einbaubreite 135mm mit 6/7-fach Zahnkranz, 139mm mit 8/9-fach, bis zu 142mm mit 10-fach 135mm mit 6/7-fach Zahnkranz, 139mm mit 8/9-fach, bis zu 142mm mit 10-fach 135mm mit 1-fach, 3-fach Zahnkranz, 137mm mit 5-fach,
140 mm mit 7-fach
135mm mit 1-fach, 3-fach Zahnkranz, 137mm mit 5-fach,
140 mm mit 7-fach
Nenndauerleistung 1000W 1000W 1200W 1200W
Spannung 36V / 50,4V 36V / 50,4V 36V / 50,4V 36V / 50,4V
Bauart Direktläufer ohne Freilauf Direktläufer ohne Freilauf Direktläufer ohne Freilauf Direktläufer ohne Freilauf
Bremsscheibenaufnahme ja / ab 160 mm möglich ja / ab 160 mm möglich ja / ab 160 mm möglich ja / ab 160 mm möglich
Hallsensoren ja ja ja ja
Rekuperation möglich? ja, abhängig vom Steuersystem ja, abhängig vom Steuersystem ja, abhängig vom Steuersystem ja, abhängig vom Steuersystem
Kabellänge 25 - 30cm 25 - 30cm 25 - 30cm 25 - 30cm
Steckerstandard EPMS mit XT150 EPMS mit XT150 EPMS mit XT150 EPMS mit XT150
Einspeichen des Motors in eine Felge Gerne übernehmen wir den professionellen Laufradbau für... more

Einspeichen des Motors in eine Felge

Gerne übernehmen wir den professionellen Laufradbau für Sie. Unsere Mechaniker verwenden dabei nur hochwertige Bauteile namhafter Hersteller und achten besonders auf Robustheit und Langlebigkeit. Sofern technisch möglich verwenden wir hochstabile Aluminium-Hohlkammer-Felgen, die ein knickfreies Eintreten der Speichen in die Felge ermöglichen. Wir verwenden ausschließlich rostfreie Edelstahlspeichen von Markenherstellern.

Sie können bei Speichen und Felgen jeweils zwischen schwarz und silbern wählen. Bitte geben Sie an, wie viele Ritzel/Zahnkränze Ihr Schraubkranz hat. Bei fehlenden Angaben zentrieren wir das Laufrad standardmäßig für einen 7-fach Kranz. zum Einspeich-Service

 Die Einbaubreite von 135mm gilt bei der Verwendung von 1x Ritzeln. Bei größerer Gangzahl wird der Motor breiter als 135mm.

Montage der Bremsscheibe

Vorderrad- und Hinterradmotor sind mit einer 6-Loch Bremsscheibenaufnahme versehen. Der Abstand zwischen Bremsscheibe und Motorgehäuse beträgt bei allen Crystalyte Motoren 18 mm für 160er, 180er und 203er Scheiben. Uns ist bisher kein Fall bekannt, bei dem die Scheibenbremse nicht mit dem Crystalyte montiert werden konnte.

Hinweis: Verwenden Sie zur Montage der Bremsscheibe ausschließlich 5x8mm Schrauben. Längere Schrauben blockieren die Mechanik des Motors und können Ihren Umbausatz beschädigen. Geeignete Schrauben finden Sie hier: 5x8mm Edelstahl TORX Schrauben.



Maxon MX Motor Maxon MX Motor
From €1,333.70 *
Maxon MX Boost Motor Maxon MX Boost Motor
From €1,543.70 *
Maxon MXUrban Motor Maxon MXUrban Motor
From €1,533.70 *
Last Viewed