Products from Grin Technologies

Grin Technologies
Close filters
from to
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Konfigurationskabel für Cycle Analyst / Baserunner / Phaserunner / Cycle Satiator Konfigurationskabel für Cycle Analyst / Baserunner / Phaserunner / Cycle Satiator
Mit diesem Konfigurationskabel können Sie das volle Potenzial des Cycle Analyst, des Cycle Satiator, des Baserunner und des Phaserunner ausschöpfen. Sie können alle Daten auslesen und bequem über den PC verwalten und Ihre Geräte...
€24.90 *
Cycle Analyst 2.3 Cycle Analyst 2.3
Cycle Analyst is a computer gauge for pedelecs, e-bikes and other electric vehicles. Cycle Analyst is also a full fledged bike computer. The 10x2.5cm screen can display the following data: Volt (V), Watt (W) and Ampere (A): Instant data...
From €125.00 *
Cycle Analyst 3.1 Cycle Analyst 3.1
Cycle Analyst is a computer gauge for pedelecs, e-bikes and other electric vehicles. Version 3.0 also enables using THUN bottom brackets with torque gauge. This way retrofitted e-bikes and pedelecs can make use of power-based support....
From €149.00 *
Adaptor module to connect Cycle Analyst 3.0 to old 2.0 controllers Adaptor module to connect Cycle Analyst 3.0 to old 2.0 controllers
Adaptor module to connect Cycle Analyst 3.0 to controllers with old 2.0 port.
€49.00 *
Cycle Analogger with integrated GPS Cycle Analogger with integrated GPS
Use the Cycle Analogger during a ride to record your GPS position and data measured by your Cycle Analyst. All data are stored to an included 1GB Micro SD card for later processing and filing. Attention: This product is not Plug&Play...
€159.00 *
Cycle Analogger without integrated GPS Cycle Analogger without integrated GPS
Use the Cycle Analogger to record your data measured by your Cycle Analyst. All data are stored to an included 1GB Micro SD card for later processing and filing. Attention: This product is not Plug&Play ready! To connect the Cycle...
€119.00 *
Potentiometer für Cycle Analyst Potentiometer für Cycle Analyst
Mit dem Potentiometer können Sie einzelne Funktionen des Cycle Analyst direkt ansteuern ohne den Weg über das Menü nehmen zu müssen. Die mitgelieferte Edelstahlhalterung wird an der Rückseite des Cycle Analyst Displays mithilfe einer...
From €29.90 *
external high current shunt 0.25mOhm for Cycle Analyst 2.3 external high current shunt 0.25mOhm for Cycle Analyst 2.3
A high-current shunt to use with the high-current version of the Cycle Analyst 2.3 or 3.0 or selfmade projects. continuous current 300A, temporarily 800A.
€34.90 *
external high current shunt 0.5mOhm for Cycle Analyst 2.3 High Current external high current shunt 0.5mOhm for Cycle Analyst 2.3 High Current
external high current shunt 0.5mOhm for Cycle Analyst 2.3 High Current
€34.90 *
external high current shunt 1.0mOhm for Cycle Analyst 3.0 external high current shunt 1.0mOhm for Cycle Analyst 3.0
External high current shunt 1.0mOhm for Cycle Analyst 3.0 with pass-through power and speed signals to connect third party controllers. Delivery does not include Anderson® PowerPole® connectors .
€29.00 *
external high current shunt 1.0mOhm for Cycle Analyst 3.0 external high current shunt 1.0mOhm for Cycle Analyst 3.0
External high current shunt 1.0mOhm for Cycle Analyst 3.0 with pass-through power and speed signals to connect third party controllers. Delivery includes Anderson® PowerPole® connectors .
€34.90 *
special stainless steel handlebar adaptor for Cycle Analyst displays (1 1/8in) special stainless steel handlebar adaptor for Cycle Analyst displays (1 1/8in)
special stainless steel handlebar adaptor for Cycle Analyst displays (1 1/8in).
€24.90 *
1 From 2
Last Viewed