Reserve kettingwielen voor Bafang 250W motoren

€ 9,90 *

inkl. BTW. excl. versendkosten

aantal tanden:

  • mobf-rp-geny28
    • Replacement gear cogs for Bafang 250W motors.
    • Motor tuning with steel gear cogs
    • Replacement gear cogs made from Nylon.
Je voordelen
  • Gratis verzending in DE vanaf 100 €
  • Gratis verzending in EU vanaf € 500
  • 45 dagen recht op retour
  • Gratis retourzending
Tune your motor with these planetary gears or replace worn gears. Nylon gears are the standard...meer

Tune your motor with these planetary gears or replace worn gears. Nylon gears are the standard used in many geared motors. Please select the appropriate type below. Use the teeth of your existing planetary gears as a guide.

The price refers to one gear, normally 3 are required for a motor.

Technical details Nylon, 28 teeth
for 250 W Bafang
Nylon, 36 teeth
for 250 W Bafang
42 teeth
for Bafang CST und BPM
Diameter: 37,5 mm 37,5 mm 54 mm
Width: 10 mm 11 mm 12 mm
Axle hole diameter: 8 mm 8 mm 12 mm
Lagerdurchmesser: 22 mm 22 mm 28 mm

 

Note:
We recommend opening the motor and determining the number of teeth in advance before ordering.

Our recommendation:
If only one gear is defective, replace all three anyway. Two worn gears in combination with a new gear will contribute to faster wear of the new gear. With a completely new set, the wear of the gears occurs much more slowly and, above all, evenly. As a result, the engine runs smoother and, above all, quieter.

Controllerconfiguratie Controllerconfiguratie
Prijs op aanvraag
Laatst bekeken