Prodotti da Grin Technologies

Grin Technologies
Chiudi filtri
da a
  •  
  •  
  •  
1 Da 3
Nessun risultato trovato per il filtro!
Cavo di configurazione per Cycle Analyst / Satiator Cavo di configurazione per Cycle Analyst / Satiator
Mit diesem Konfigurationskabel können Sie das volle Potenzial des Cycle Analyst, des Cycle Satiator, des Baserunner und des Phaserunner ausschöpfen. Sie können alle Daten auslesen und bequem über den PC verwalten und Ihre Geräte...
24,90 € *
Cycle Analyst 2.4 Cycle Analyst 2.4
Cycle Analyst is a computer gauge for pedelecs, e-bikes and other electric vehicles. Cycle Analyst is also a full fledged bike computer. The 10x2.5cm screen can display the following data: Volt (V), Watt (W) and Ampere (A): Instant data...
Da 125,00 € *
Modulo adattatore per il collegamento di Cycle Analysts 3.1 ai vecchi controller 2.0 Modulo adattatore per il collegamento di Cycle Analysts 3.1 ai vecchi controller 2.0
Adaptor module to connect Cycle Analyst 3.0 to controllers with old 2.0 port.
49,00 € *
Cycle Analogger con GPS integrato Cycle Analogger con GPS integrato
Use the Cycle Analogger during a ride to record your GPS position and data measured by your Cycle Analyst. All data are stored to an included 1GB Micro SD card for later processing and filing. Attention: This product is not Plug&Play...
159,00 € *
Cycle Analogger Cycle Analogger
Use the Cycle Analogger to record your data measured by your Cycle Analyst. All data are stored to an included 1GB Micro SD card for later processing and filing. Attention: This product is not Plug&Play ready! To connect the Cycle...
119,00 € *
Shunt esterno ad alta corrente 0,25 mOhm per Cycle Analyst Shunt esterno ad alta corrente 0,25 mOhm per Cycle Analyst
A high-current shunt to use with the high-current version of the Cycle Analyst 2.3 or 3.0 or selfmade projects. continuous current 300A, temporarily 800A.
34,90 € *
Shunt esterno ad alta corrente 0,5 mOhm per Cycle Analyst 2.4 Shunt esterno ad alta corrente 0,5 mOhm per Cycle Analyst 2.4
external high current shunt 0.5mOhm for Cycle Analyst 2.3 High Current
34,90 € *
Shunt esterno ad alta corrente 1,0 mOhm per Cycle Analyst Shunt esterno ad alta corrente 1,0 mOhm per Cycle Analyst
External high current shunt 1.0mOhm for Cycle Analyst 3.0 with pass-through power and speed signals to connect third party controllers. Delivery does not include Anderson® PowerPole® connectors .
29,00 € *
Shunt esterno ad alta corrente 1,0 mOhm per Cycle Analyst 3,1 Shunt esterno ad alta corrente 1,0 mOhm per Cycle Analyst 3,1
External high current shunt 1.0mOhm for Cycle Analyst 3.0 with pass-through power and speed signals to connect third party controllers. Delivery includes Anderson® PowerPole® connectors .
34,90 € *
Supporto per Cycle Analyst per tubo sterzo - acciaio inossidabile Supporto per Cycle Analyst per tubo sterzo - acciaio inossidabile
special stainless steel handlebar adaptor for Cycle Analyst displays (1 1/8in).
19,90 € *
Sensore di velocità per Cycle Analyst con contatto reed e magnete a raggio Sensore di velocità per Cycle Analyst con contatto reed e magnete a raggio
 Speed sensor for Cycle Analyst: with Reed contact and spoke magnet
14,90 € *
Modulo batteria GRIN Ligo Modulo batteria GRIN Ligo
Die LIGO Battery entstand aus der Idee heraus, die Transportrestriktionen zu umgehen, die Akkus über 100 Wh im Flugverkehr nicht zulassen. Entstanden ist ein modularer und dadurch sehr vielseitiger Akku . Wie Spielzeugbausteine können...
169,00 € *
1 Da 3
Visto