Crystalyte achterwielmotor 1000W (XT150 motor fase aansluiting en JST Hall sensor aansluiting)

vanaf € 399,00 *

inkl. BTW. excl. versendkosten

toerental bij 36 V:

  • mocy-r-HT3525-02
    • Motorkabel: EPMS
    • Model: HS3540
    • Kleur: antraciet
Je voordelen
  • Gratis verzending in DE vanaf 100 €
  • Gratis verzending in EU vanaf € 500
  • 45 dagen recht op retour
  • Gratis retourzending
Crystalyte 1000W Motor Ebike-Solutions sells well-proven, latest generation...meer

Crystalyte 1000W Motor

Ebike-Solutions sells well-proven, latest generation 1000 Watt Crystalyte Motors. HT Series (HT3525) is the version with the highest torque: Fast acceleration and a lot of power but a slower top speed than the HS Series. HS Series (HS3540, HS3555, HS4080) is the fast variety among Crystalyte motors: slower acceleration, but a high top speed.



Crystalyte Motor
HT3525 HS3540 HS3555 HS4080
Info
High-torque
version (t=torque)
fast version (s=speed) fast version (s=speed) fast version (s=speed)
installation into rear wheel rear wheel rear wheel rear wheel
Bike no rim, no spokes. no rim, no spokes.
no rim, no spokes.
no rim, no spokes.
for wheel sizes 20/24/26/28 inch 20/24/26/28 inch 20/24/26/28 inch 20/24/26/28 inch
Top speed
in 26" wheel, 48V
up to 50kph (31mph) up to 55kph (34mph) up to 60kph (37mph) up to 60kph (37mph)
climbing ability very good good good good
Maximum power 1500W 1500W 1500W 2500W
Rotational speed (rpm) at 36V 245rpm 375rpm 475rpm 420rpm
motor colour black black black black


Lacing the motor to a rim

We are glad to professionally build your wheels for you. Our mechanics only use high-quality parts of well-known suppliers and have a keen eye on sturdiness and longevity. As long as technically possible we use sturdy double wall aluminium rims that allow the spoke to enter the rim without bending. We exclusively use stainless steel spokes from brand manufacturers.

Your choice of either black or silver spokes and rims, respectively. Please note how many gears your freewheel needs to have. Without any specification we will usually true your wheel to fit a seven-speed cogset. go to wheel building service



Attaching brake disc

Front wheel and rear wheel motors use a 6-hole-pattern disc brake mount. With all Crystalite motors the distance between brake disc and motor housing is 18mm for 160mm, 180mm and 203mm discs. Until now we have never experienced that a brake disc could not be mounted on a Crystalyte motor.

Note: To tighten brake disc to the motor use 5x8mm bolts only. Longer bolts could block the motor's mechanism and damage your conversion kit. Find suitable bolts here: 5x8mm stainless steel TORX bolts.



Technical details HT3525 HS3540 HS3555 HS4080
motor weight 7.3kg (16.1lbs) 7.3kg (16.1lbs) 7.3kg (16.1lbs) 8kg (17.6lbs)
Motors number of spoke holes 36 36 36 36
Spacing 135mm with 6/7-speed freewheel, 139mm with 8/9-speed, up to 142mm with 10-speed 135mm with 6/7-speed freewheel, 139mm with 8/9-speed, up to 142mm with 10-speed 135mm with 6/7-speed freewheel, 139mm with 8/9-speed, up to 142mm with 10-speed 135mm with 1/3-speed freewheel, 137mm with 5-speed,
up to 140mm with 7-speed
Rated continuous power 1000W 1000W 1000W 1000W
Voltage 36V / 48V 36V / 48V 36V / 48V 36V / 48V
Type Direct drive without freewheel Direct drive without freewheel Direct drive without freewheel Direct drive without freewheel
Brake disc mount yes / possible with 160mm discs and up yes / possible with 160mm discs and up yes / possible with 160mm discs and up yes / possible with 160mm discs and up
Hall sensors yes yes yes yes
Recuperation possible?
yes, depends on control system yes, depends on control system yes, depends on control system yes, depends on control system

Please note: E-bikes need to have an operating license and insurance, if they shall be used in public road traffic. Please check with your local licensing authority (in Germany: TÜV or similar organisation) about licensing requirements.


Do you have any further questions?

FAQs and answers about our online shop, please click:

FAQs
Technische details HT3525 HS3540 HS3555 --> HS4065... meer
Technische details HT3525 HS3540HS4065 HS4080
Gewicht van de motor 7,3 kg 7,3 kg8 kg 8 kg
Spaakgaten van de motor 36 3636 36
Inbouwbreedte 135mm met 6/7-speed cassette, 139mm met 8/9-speed cassette, tot 142mm met 10-speed cassette 135mm met 6/7-speed cassette, 139mm met 8/9-speed cassette, tot 142mm met 10-speed cassette135 mm met 1-voudig, 3-voudig tandwiel, 137 mm met 5-voudig,
140 mm met 7-voudig tandwiel
135 mm met 1-voudig, 3-voudig tandwiel, 137 mm met 5-voudig,
140 mm met 7-voudig tandwiel
Continu nominaal vermogen 1000W. 1000W.1200W. 1200W.
Spanning 36V/ 50,4V 36V/ 50,4V36V/ 50,4V 36V/ 50,4V
Type motor Directe aandrijving zonder vrijloop Directe aandrijving zonder vrijloopDirecte aandrijving zonder vrijloop Directe aandrijving zonder vrijloop
remschijfbevestiging ja / mogelijk vanaf 160 mm ja / mogelijk vanaf 160 mmja / mogelijk vanaf 160 mm ja / mogelijk vanaf 160 mm
Hall-sensoren ja jaja ja
Recuperatie mogelijk? ja, afhankelijk van de controller ja, afhankelijk van de controllerja, afhankelijk van de controller ja, afhankelijk van de controller
kabellengte 25- 30cm 25- 30cm 25- 30cm 25- 30cm
Connector standaard EPMS EPMS EPMS EPMS
Motor in een velg inspaken We nemen graag de professionele wielbouw voor je over. Onze... meer

Motor in een velg inspaken

We nemen graag de professionele wielbouw voor je over. Onze monteurs gebruiken alleen onderdelen van hoge kwaliteit en besteden bijzondere aandacht aan robuustheid en duurzaamheid. Indien technisch mogelijk maken we gebruik van zeer stabiele holle wandvelgen van aluminium, waardoor de spaken zonder knikken in de velg komen. We gebruiken alleen roestvrij stalen spaken van merkfabrikanten.

Je kunt kiezen tussen zwarte en zilveren spaken en velgen. Geef aan hoeveel tandwielen je freewheel heeft. Bij ontbrekende specificaties centreren we het wiel standaard voor een 7-voudige cassette. naar de wielbouwservice

 De inbouwbreedte van 135 mm geldt bij gebruik van een enkel tandwiel. Met een hoger aantal versnellingen wordt de motor breder dan 135mm.

Montage van de remschijf

Voorwiel en achterwielmotor zijn voorzien van een 6-gaats remschijfbevestiging. De afstand tussen de remschijf en de motor is 18 mm voor alle Crystalyte motoren voor 160, 180 en 203 schijven. We kennen geen enkel geval waarin de schijfrem niet met de Crystalyte gemonteerd kon worden.

Opmerking: Gebruik alleen 5x8mm schroeven om de remschijf te monteren. Langere schroeven zullen het mechaniek van de motor vastklemmen en kunnen je ombouwset beschadigen. Je kunt hier geschikte schroeven vinden: 5x8mm roestvrijstalen TORX schroeven.



Maxon MX motor Maxon MX motor
vanaf € 1.333,70 *
Maxon MX Boost motor Maxon MX Boost motor
vanaf € 1.543,70 *
Maxon MXUrban motor Maxon MXUrban motor
vanaf € 1.533,70 *
Laatst bekeken