Set di sensori del pedale quadrati

Da 19,90 € *

Prezzi incl. IVA più spese di spedizione

Compatible With:

Mounting Type:

  • aecapas4kgz-01
    • for our IPS and IES systems
    • for square taper bottom brackets
    • Version 1: for tool-free assembly
    • Version 2: for professional assembly
Vantaggi
  • Livraison gratuite dans l'UE à partir de €500
  • 45 jours droit de retour
  • Retours gratuits et faciles
The Square Taper Cadence Sensor Set is available in two versions. Each set includes one... altro

The Square Taper Cadence Sensor Set is available in two versions. Each set includes one cadence sensor for left side or right side attachment, each. For your conversion kit you need only one of these cadence sensors. This possibility to choose offers a great degree of flexibility during installation you can decide while directly working on your bike on which side the sensor you want to attach the sensor. No tools are required for assembly.


Our Square Taper Cadence Sensor Sets are available:

1. for tool-free assembly with adhesive sensor and splittable magnet disc.

{jwplayer video_tag=mtg_4_kant_pas_720 align=rechts}

Requirement: Distance between crank and axle must beless than 8mm.

The included magnet disc is splittable and can therefore easily be attached to the axle. The cadence sensor will be attached by sticking it to the frame with a maximum 5mm distance to the magnet disc. In addition it can be attached by pulling zip ties through the buckles.

Delivery includes:

  • EBS IPS/IES adhesive cadence sensor left aepas04
  • EBS IPS/IES adhesive cadence sensor right aepas04
  • splittable PAS disc with 12 magnets for square taper axles aepasmd-01




2. for professional assembly under bottom bracket cup (tools required)

Requirements: none, basically suited for square taper bottom brackets

The cadence sensor is clamped under either the right side or left side bottom bracket cup. For this you need our Square Taper Assembly Tool Set. The magnet disc is pushed on the bottom bracket axle with a maximum 5mm distance to the cadence sensor. To assemble the set, you'll need the Square Taper Assembly Tool Set.

Delivery includes:

  • EBS IPS/IES bracket-mount cadence sensor left aepas03
  • EBS IPS/IES bracket-mount cadence sensor right aepas03
  • PAS disc with 12 magnets for square taper axles aepasmd-02

You find support for determining your bottom bracket type and an overview about our bottom bracket set here.

Eine Hilfestellung zur Bestimmung Ihres Tretlagers und eine Übersicht über unsere Tretlager-Sets... altro

Eine Hilfestellung zur Bestimmung Ihres Tretlagers und eine Übersicht über unsere Tretlager-Sets finden Sie hier.

Verfügbare Downloads:
Cycle Analyst 3.1 Cycle Analyst 3.1
Da 149,00 € *
Cycle Analyst 3.1 Cycle Analyst 3.1
Da 149,00 € *
Visto