Motore della ruota anteriore Bafang BPM 36V 250W
- Numero Ordine: mobf08-f-26b
- Informazioni sulla variante:
- higher power
- for 100mm forks
- compact housing
- with disc brake mount
- higher power
- Livraison gratuite dans l'UE à partir de €500
- 45 jours droit de retour
- Retours gratuits et faciles
Bafang BPM is the front wheel version of the Bafang CST. It is placed between our Bafang SWXK5 and the Puma motor: BPM features higher power than the Bafang but is smaller than the Puma. As opposed to the Puma it also features a fast decoupler with a 9-pin connector. With a rated voltage of 36V top speed of 25kph (15mph) is reached. The motor comes with a standard 6-hole pattern disc brake mount. Delivery includes torque support tab washers.
Please note: The motor's hub spacing is 100mm. It may be possible that due to the shape of the fork dropouts the motor cannot be fitted properly. Please check, if the fork legs curve inside above the dropouts, because this might not leave enough room for the motor housing.
Delivery includes a motor extension cable with 120cm (47in) length, a 9-pin connector and a set of cap nuts, washers and tab washers. The motor is not laced into a wheel. You can book this service separately.
| Technical details | Bafang BPM Front Wheel Motor. |
| motor weight | 4.2kg (9.3lbs) |
| motor diameter approx. | 166mm |
| Motors number of spoke holes | 36 |
| installation into | front wheel |
| Spacing | 100mm |
| Rated continuous power | 250W |
| Rated Voltage | 36V |
| Type | Gear motor with freewheel |
| Hall sensors | no |
| Recuperation possible? | no |
| Brake disc mount | yes |
| Cable exit | right side (in direction of travel) |
| Technische Details | Bafang BPM Vorderradmotor |
| Motorgewicht | 4,2kg |
| Motordurchmesser ca. | 166mm |
| Speichenlöcher des Motors | 36 |
| Einbau in | Vorderrad |
| Einbaubreite | 100mm |
| Nenndauerleistung | 250W |
| Nennspannung | 36V |
| Bauart | Getriebemotor mit Freilauf |
| Hallsensoren | nein |
| Rekuperation möglich? | nein |
| Bremsscheibenaufnahme | ja |
| Kabelaustritt | an der Seite / Fahrtrichtung rechts |
Bitte beachten: Die Einbaubreite des Motors beträgt 100mm. Es kann allerdings sein, dass der Motor aufgrund der Beschaffenheit der Ausfallenden an der Gabel nicht eingepasst werden kann. Bitte prüfen Sie, ob sich die Gabel oberhalb der Achsaufnahme verjüngt, da dies dazu führen kann, dass der Platz für das Motorgehäuse nicht ausreichend ist.
