Chargeur universel Cycle Satiator
The Cycle Satiator is a universal high-performance charger and is suitable for all common cell chemistries: Li-Ion, LiFePO4, NiMH, NiCd or lead batteries. Due to the high efficiency of up to 95%, the device requires no ventilation at all. With a maximum charging power of 360 watts, the Satiator requires only half the charging time compared to typical chargers with 150 - 200 watts.
The charger comes with an easy to use software for the PC, which allows to set or change the charging profile and other settings. New charging profiles can also be created directly on the charger without a PC. A particular advantage is the possibility of personal adjustment of the final charge voltage for Li-Ion batteries. By reducing the charge from 100% to 80-90%, you can greatly increase the possible number of cycles of your battery and thus save considerable costs in the long term. If the maximum range is required, simply select the 100% profile. The Satiator software saves your settings, so you can always switch quickly from one setting to another.
The charger's firmware can be easily updated and is therefore also suitable for future battery innovations or changed technical conditions.
The high-contrast OLED screen shows important information: charged ampere-hours, voltage, charging current and the temperature of the charger. In addition, the slim and compact shape allows the Satiator to be easily stored in a small bicycle bag and taken anywhere. The housing of the charger offers good water protection. Because of the passive ventilation of the charger there is no noise. This allows a trouble-free recharging on bike trips in cafés, in the apartment etc.
Universal charger for all battery chemistries
programmable voltage level
upgradeable to future battery innovations
large and bright OLED screen
no ventilation noises
water-repellent
compact and slim design
Technische Daten
Elektrisch | 12-50,2V | 36-72V | 12-24V |
Eingangsspannungsbereich | 100-240 VAC 50-60 Hz | 100-240 VAC 50-60 Hz | 100-240 VAC 50-60 Hz |
Maximale Ausgangsleistung | 12-63 V, 0-8A, 0-360 Watt | 20-103 V, 0-5A, 0-360 V | k.A. V, 0-15A, 0-360 V |
Wirkungsgrad | 95% @ 230 V, 94% @ 120 V | ||
Leistungsfaktor | >99% | >99% | >99% |
Netzstromverbrauch im Leerlauf | <1 Watt | <1 Watt | <1 Watt |
Eingangs-/Ausgangs-Isolierung | Verstärkte Isolierung, getestet bis 3,75kV | Verstärkte Isolierung, getestet bis 3,75kV | Verstärkte Isolierung, getestet bis 3,75kV |
Erdung | Geerdetes Gehäuse, DC Ausgang nicht geerdet | Geerdetes Gehäuse, DC Ausgang nicht geerdet | Geerdetes Gehäuse, DC Ausgang nicht geerdet |
Parasitärer Rückstrom aus dem Akkumulator | <0,1 mA (600 kOhm Imdepdanz, weniger als 1 Ah im Jahr) | <0,1 mA (600 kOhm Imdepdanz, weniger als 1 Ah im Jahr) | <0,1 mA (600 kOhm Imdepdanz, weniger als 1 Ah im Jahr) |
Mechanisch | 12-50,2V | 36-72V | 12-24V |
Abmessungen | 237x78x48mm | 237x78x48mm | 237x78x48mm |
Gewicht | 1,06 kg (1,33 kg mit den AC- und DC Kabeln und Steckern) | 1,06 kg (1,33 kg mit den AC- und DC Kabeln und Steckern) | 1,06 kg (1,33 kg mit den AC- und DC Kabeln und Steckern) |
Vibrationen | SAE J1455-1994 Kategorie 2, UL458 / CSA 107,2 | SAE J1455-1994 Kategorie 2, UL458 / CSA 107,2 | SAE J1455-1994 Kategorie 2, UL458 / CSA 107,2 |
Gehäusematerial | Pulverbeschichtetes Aluminium | Pulverbeschichtetes Aluminium | Pulverbeschichtetes Aluminium |
AC Eingangsstecker | IEC320-C14 | IEC320-C14 | IEC320-C14 |
AC Eingangskabel | 2 m mit IEC320-C13 / NEMA-15 Stecker | 2 m mit IEC320-C13 / NEMA-15 Stecker | 2 m mit IEC320-C13 / NEMA-15 Stecker |
DC Ausgangsstecker | IP67 10A Multicomp / Singatron 2CT3002-W03400 | IP67 10A Multicomp / Singatron 2CT3002-W03400 | IP67 10A Multicomp / Singatron 2CT3002-W03400 |
DC Ausgangskabel | 1 m mit 3 Anschlussstiften Neutrik XLR (1=DC+, 2=DC-, 3=Signal) | 1 m mit 3 Anschlussstiften Neutrik XLR (1=DC+, 2=DC-, 3=Signal) | 1 m mit 3 Anschlussstiften Neutrik XLR (1=DC+, 2=DC-, 3=Signal) |
Umgebungsbedingungen | 12-50,2V | 36-72V | 12-24V |
Betriebstemperatur | -30 Grad bis +50 Grad (mit herabgesetzter Ausgangsleistung >30 Grad) | -30 Grad bis +50 Grad (mit herabgesetzter Ausgangsleistung >30 Grad) | -30 Grad bis +50 Grad (mit herabgesetzter Ausgangsleistung >30 Grad) |
Lagertemperatur | -40 Grad bis +60 Grad | -40 Grad bis +60 Grad | -40 Grad bis +60 Grad |
Hier finden sowohl Bedienungsanleitungen in deutsch und englisch als auch einen Link zur Software (Windows / MacOS / Linux) für die Bedienung Ihres Cycle Satiators. Bitte beachten Sie, dass wir für eventuelle Schäden während oder nach der Installation der Software auf Ihrem Gerät keine Haftung übernehmen. Bitte laden Sie die Software direkt vom kanadischen Hersteller "Grin Technologies" herunter: Software Download Cycle Satiator.
- Bedienungsanleitung Cycle Satiator Firmware 1.00 V1.3
- Cycle Satiator User Manual for V1.0 Firmware (english)