Promotion-Box

Battery connector splash proof

Battery connector splash proof

  • Plug & Drive plug to connect controller and battery
  • splash proof with locking device
  • 2-pin, reverse polarity proof

Art.Nr.: aebcwp01

Produktbeschreibung

EBS Battery Connectors are perfect to connect batteries to controllers. They set a new standard in terms of safety and comfort: They are splash proof, reverse polarity proof and use a locking tab that prevents accidental separation. This is why we use EBS Connectors for our Plug & Drive Conversion Kit's power supply. Suited connectors are factory issue with all batteries from Ebike Solution. Otherwise you need a male connector for your battery. Basically, EBS Battery Connectors can be used for any 2-pin connection.
Battery connectors are suited for systems with 36V and 15A continuous current.


Battery connectors splash proof - female

Battery connectors splash proof - female - content:

  • 1x socket housing 2-pin
  • 1x rubber cap 2-pin
  • 2x socket contact 0,75-1,5 mm2
  • 2x single conductor seal, rubber
  • 1x red fixing clamp plastic

Battery connectors splash proof - male

Battery connectors splash proof - male - content:

  • 1x pin housing 2-pin
  • 1x rubber cap 2-pin
  • 2x socket contact 0,75-1,5 mm2
  • 2x single conductor seal, rubber

How to assemble your custom EBS battery connector

aebcwp01 installation pic.1pic. 1: Pull cable (a) through the rubber cap (g).












aebcwp01 installation pic.1pic. 2: Remove isolation at the tips and pull cable (a) through single conductor seal (c).











aebcwp01 installation pic.3pic. 3: Crimp cable (a) to contact (b). Make sure that the yellow single conductor seal (c) is tightly crimped to the outer collar of the contact to guarantee that the connection is splash proof. Cable strand is tightly crimped to to the inner collar. Check in advance if the contact is crimped correctly by pulling the cable. The cable must not disconnect from the contact. Repeat with second cable.







aebcwp01 installation pic. 4apic. 4a (for male connectors): Pin housing: Push contacts (b) into the pin housing (d). Check if the contact's small metal latches are fixed inside the housing, by carefully pulling the cable. The contact must not disconnect from the housing. Make sure that the black contact is plugged into port 1 and the red contact into port 2.








aebcwp01 installation pic. 4bpic. 4b (for female connectors): Socket housing: Push contacts (b) into socket housing (e). Make sure both contacts are exactly level with each other. Push red fixing clamp (f) onto the housing. Check correct fixation of clamp by carefully pulling it. Check if the contact's small metal latches are fixed inside the housing, by carefully pulling the cable. The contact must not disconnect from the housing. Make sure that the black contact is plugged into port 1 and the red contact into port 2.





aebcwp01 installation pic. 5pic. 5: Pull rubber cap (g) over pin housing and socket housing. 


Attention: Wrong polarity can cause short circuit. Please make sure to check for correct polarity before use.








Welche Eigenschaften soll Ihr Produkt haben:
Battery connectors splash proof - male

Battery connectors splash proof - male

  • the opposite connector to our Plug & Drive Controller connectors
  • splash proof with locking device
  • 2-pin, reverse polarity proof

4,90 EUR

inkl. 19 % MwSt.
zzgl. Versandkosten

Lieferzeit bei grüner Ampel: 1-4 Werktage

verfügbar

verfügbar

Battery connectors splash proof - female

Battery connectors splash proof - female

  • the opposite connector to our pedelec batteries
  • splash proof with locking device
  • 2-pin, reverse polarity proof

4,90 EUR

inkl. 19 % MwSt.
zzgl. Versandkosten

Lieferzeit bei grüner Ampel: 1-4 Werktage

verfügbar

verfügbar