The EBS Climber Conversion Kit...
The EBS Climber is the ideal trekking conversion kit. It is equipped with our versatile SGI-G motor – a mixture of city and mountain engine. Not only the usual everyday trips are easy to master with this hub motor, but also longer distances with different gradients. The powerful and extremely quiet SGI-G motor enables effortless locomotion, whether on short distances in the city or on longer journeys across country. The high continuous torque makes even more demanding bike tours in hilly terrain child's play. The conversion kit is ideal for anyone who wants to convert their city bike or MTB into a light pedelec.
...as Improved V2 Version
The V2 version is characterized by a significantly lower total weight, reduced noise and a wide range of tuning options. In addition to a light and quiet motor, all V2 conversion kits include a controller with field-oriented control (FOC) and a colour display with USB-Port. Both display and controller feature the extended V2 communication protocol. This allows you more adjustment options via the display and more control over the riding style of your pedelec than before.
|EBS Climber V2 250W Pedelec Conversion Kit...||and its preferred area of application|
|» mix of city and mountain motor||» for trekking bikes|
|» stronger than Plug & Drive, smaller than Puma||» for tours in hill country|
|» light and subtle ||» for trips in and around the city|
The Components of the Climber V2 Conversion Kit
EBS SGI-G Geared Motor - Quiet and Powerful
The planetery gear oft the SGI-G electric motor is completely helical and equipped with a high number of poles of the magnet system. This results in a very quiet motor operation and high torque. The integrated freewheel is so smooth-running that you are not braked when riding with the system switched off. The built-in NTC Thermistor monitors the temperature of the engine and automatically switches it off, if necessary to protect the system from overheating.
The SGI-G rear wheel motor has an integrated sprocket cassette holder. The 6-hole brake disc holder makes it suitable for both rim brakes and disc brakes. The quick motor disconnection, enables a simple disconnection of the wheel from the system and allows an uncomplicated tyre change.
Colour Display with Control Options
You will receive a modern TFT colour display with a USB connection for charging your smartphone. The V2 Communication Protocol allows you to make various settings yourself directly via display. These include the number of support levels, the response behaviour of the pedal sensor or the starting behaviour of the motor. For each level you can individually adjust the strength of the support, so that the riding behavior can be optimally adjusted to your needs. The display shows the battery charge level, the current speed, the support level selected and the mileage covered.
EBS Controller with FOC
The various current limits are selected in the controller via display, which results in a very natural riding experience. The support levels cover a wide range from gentle tail wind to sporty acceleration. The Field-Oriented Control (FOC) increases the efficiency of the motor and thereby the range of your pedelec. The main advantage of the FOC Technology though is the reduction of harmonics in the motor winding. This makes the motor run even calmer and quieter. Another new feature of the V2 controller is the thermal protection. The controller permanently monitors the temperature thermistor ("NTC") of the SGI-G motor and switches off the support to protect the system in the event of an overload. Full support is available until the system is switched off. You can therefore tackle any gradients without hesitation. The Climber V2 is therefore also suitable for track profiles with higher gradients of up to approx. 10% and 100 meter uphill (depending on the total weight, impeller size and other parameters).
Due to its slim design, the standard controller included in the set is easy to install in most cases. However, other housing formats are also available if required. Some of these are even integrated into the battery holder, which makes the conversion even more discreet. The integrated controllers are currently available for our popular water bottle batteries and the V1 frame battery.
EBS Cadence Sensor for your Bottom Bracket
The Pedal Assist Sensor (PAS) detects the driver's pedalling movement and controls the support provided by the engine. The separable magnetic disc for a square bottom bracket is supplied as standard, which only has to be attached to the bottom bracket axle - no further work on the bottom bracket and no assembly tools are required.
Note: If you have a Hollowtech II or Octalink bottom bracket, you will need a different magnetic disc. Select the appropriate EBS Pedal Sensor Set for you under the menu item "Upgrade options" at the top of the page. For assistance in determining your bottom bracket, see Electric Bicycle Technology:
36V EBS Pedelec Battery
To operate the EBS Plug & Drive V2 conversion kit, you need a rechargeable battery. Ebike Solutions offers EBS pedelec batteries in various designs, e.g. in the form of a water bottle, as a frame battery or in the luggage carrier. Depending on the battery model selected, ranges of over 100km are also possible under everyday conditions (*with 36V 24Ah battery - 870 Wh). Optionally you can also use an already existing 36V battery. This must have a continuous current carrying capacity of 15A or more in addition to the matching battery plug.
Thumb Throttle as Start-Assist
Optionally you can connect a thumb throttle with a start-assist up to 6 km/h to your system. This makes it easier for you to start from a standing position and helps you to push a heavy bicycle. The starting speed can be precisely adjusted and the short reaction time is ideal for a quick start at the traffic lights. The legal guidelines for pedelecs* are still adhered to. A thumb throttle is not required to operate the conversion kit. When purchasing, you can choose from various ergonomic shapes, the function is the same in each case.
* Rules and regulations for e-bikes and pedelecs can vary significantly from country to country! Please inform yourself about current rules and regulations.
|EBS SGI-G front wheel motor||EBS SGI-G rear wheel motor|
|Maximum Speed||25 km/h||25 km/h|
|Installation Time||approx. 3 hours||approx. 3 hours|
|Motor Colour||Black / Silver||Black / Silver|
|Installation In||Front wheel||Rear wheel|
|Current Stages 3 - 9||Freely selectable from 1A to 15A||Freely selectable from 1A to 15A|
|Motor Spoke Holder||36||36|
|Motor Hub Spacing||100mm||135mm|
|Construction Type||Gear motor with freewheel||Gear motor with freewheel|
|Brake Disc Mounting||Yes||Yes|
|Factory Settings Controller|
|Undervoltage shutdown||25V for 36V rated voltage||25V for 36V rated voltage|
|Current limitation input side||15A||15A|
Instruction & Notes
Assembly of Brake Disconnectors (Optional)
Special brake switches are not necessary due to the very short overrun: As soon as you stop pedalling, the motor stops the support within 0.3 seconds. If you still want to have brake switches, you can easily adjust them at any time and for any type of brake. For this you also need our EBS cable distributor 4-fold. This has a total of four connections for the display, throttle grip (optional) and two for the brake switches.
Hub Spacing in the Rear Wheel when Using a Plug-In Cassette
The cassette recording is compatible with almost all common models, often also with 11-fold cassettes. The installation width of 135mm is independent of the plug-in cassette used, it is determined by the built-in cassette holder. With 7-fold plug-in cassettes, two discs must be placed underneath so that the cassette is firmly seated. You can order the washers at the top of this page. Further dimensions of the motor can be found in the dimension drawing in the above picture gallery.
Services of EBS
Save-In Service: Professional Impeller Construction
Gladly we take over the professional impeller construction for you. Our mechanics process only high-quality components and pay particular attention to robustness and longevity. We only use stainless steel spokes and, if technically possible, highly stable aluminium hollow-chamber rims. Please indicate in the order comment after the shopping cart how many pinions/wheels your plug-in cassette has and whether you want a certain valve type (AV/DV/SV). You can also send us your own rim for spoking instead. Please keep in mind, however, that we cannot reduce the price, as the accurate measurement requires additional work. If you would like to order a Tadpole Trike, please let us know in the order note, as it may be necessary to save differently. We will then contact you.
Conversion in our Workshop
You don't want to retrofit your bike yourself? No problem, in our workshop we can convert your ordinary bicycle into an electric bicycle with the conversion kit you have requested. In addition to the retrofit, you will receive a free initial inspection!
Your Advantages with EBS
All components of the conversion kit have been tested by us and modified to our high standard. By continuously improving the individual parts and the system communication, Ebike Solutions can provide you with a perfectly matched set of replacement parts with high-quality features. The advantages of an EBS system at a glance:
- Harmonious driving experience due to power control in the controller
- Water protected and upgraded wiring
- Tread sensors matching the bottom bracket, freely selectable and free of charge
- Various display upgrades
- Different throttle grip options
- Easy adjustment of cable lengths through finely graduated extension cables
All cables of the EBS Plug & Drive are equipped with water-protected plug connections – just plug them together and you're done. The length of the connecting cables is adjusted to suit typical conversions. We have extensions for all important cables in our range.
Your Set Selection
Prices incl. VAT plus shipping costs